Sound Controls; Picture Controls - Hitachi CP2996TA Instruction Manual

Sound controls

Volume
Use the -/+ buttons or the cursor buttons (left and right).
Sound mute button ( V)
Press once to turn off the sound.
Press a second time to turn on all speakers.
If the audio out connectors (not in all models, see the section "External
devices") are in use, the second press turns on the sound from the audio
out connectors, and a third press turns on all speakers.
Selecting the preset sound settings
There are four preset sound settings available in the Sound menu:
MUSIC, SPEECH, FLAT, and PREFERRED (adjustable).
1
Press the green button to select the Sound menu.
_________________________________________________________________________
2
On the menu line "Tone" select the required setting by using the cursor
buttons (left or right).
_________________________________________________________________________
3
Return to TV programme reception by pressing the TV button.
For further information, see the section "Sound and picture controls".

Picture controls

Selecting the preset picture settings
There are three preset picture settings available in the Vision menu:
EVENING, DAYLIGHT, and PREFERRED (adjustable).
1
Press the yellow button to select the Vision menu.
_________________________________________________________________________
2
Select the required setting by pressing the cursor buttons (left or right).
_________________________________________________________________________
3
Return to TV programme reception by pressing the TV button.
For further information, see the section "Sound and picture controls".
_________________________________________________________________________
When the TV is switched on using the mains switch on the TV set front
panel, automatic degaussing (demagnetising) is done to maintain colour
purity.
Still picture
You can freeze and unfreeze the action in the picture by pressing the
STOP button (under the lid).
Picture format
Picture format (the width and hight ratio) selection is done automatically.
Manual picture format selection (Zoom)
Manual selection may be necessary, for example, if you are using a VCR
without automatic picture format switching.
1
Press the red button.
_________________________________________________________________________
2
Change the picture format by using the cursor button (left or right).
When the LIFT display appears on the screen you can raise or lower the
picture by pressing the cursor button up or down (not in all models).
_________________________________________________________________________
3
Return to TV programme reception by pressing the TV button.
Storing new picture format
If you want to store the changed picture format for the selected
programme channel, press the OK button.
3P58 83041010-GB
Daily use
Sound
Audio STEREO
Sound channel SOUND A
Tone PREFERRED
Separation
Store
Sound
settings Equaliser
1 2
4 5
7 8
0
- / +
ZOOM
SOUND
VISION
STOP
Vision
PREFERRED
Settings
Store
Display Preferred
set-up settings
Zoom
CLASSIC (4:3)
Store »
21
»
Go back
3
6
9
TV
OK
»
Go back