Table of Contents
Advertisement
METHOD 2
RF lead from VCR to TV
RF lead from VCR to Sat
Aerial
NOTE: S-VHS video equipment should be connected to the AV2 Scart socket located on the rear of the TV. A dedi-
cated program number may then be assigned to AV2, allowing easier access to view external equipment broad-
casts.How to assign AV sockets to dedicated program numbers is explained on page 10. Alternatively, repeatedly
press the TV/AV button on your handset until SAV2 is displayed on-screen. Now begin playback operation of your
equipment.
HEADPHONE CONNECTION:
To use headphones with this TV, simply open the front control cover door and insert the headphone jack plug
(3.5mm) into the corresponding socket marked
3.5mm Headphone jack socket
(a suitable adaptor is required for larger headphone plugs).
Connecting External A
Connecting External A
RF lead to Aerial
*Scart Lead from Sat to VCR
. The TV sound will then be switched to the headphones.
21
21
V Equipment
V Equipment
*Scart Lead to AV2 on TV
Satellite LNB lead
VCR
Advertisement
Table of Contents
