Advertisement
Quick Links
ACTIVE WEDGE
CP-AW1120, CP-AW2120
SPECIFICATIONS
Peak Power (Watts)
Rated Power (Watts)
Frequency Response
Low Pass Filter (Variable)
Tuning
Woofer Size
Fuse
Dimensions (mm)
DISCLAIMER
Always ensure the Active Wedge is securely attached, to avoid movement. FUSION accepts no responsibility for damage or injury in relation
to inappropriate securing of this product.
CONTROL DESCRIPTIONS
LEVEL
This allows the adjustment of the amplifier level of the subwoofer.
Turn clockwise to increase the level. If the sound becomes distorted
reduce the level.
LOW PASS FILTER (LPF)
This allows the adjustment of the highest frequency the Active
Wedge will produce. This should be adjusted to blend with your main
speakers. Typically, this will be set to around 100Hz (approximately
the central position of the control knob).
REMOTE LEVEL CONTROLLER
When connected, this allows further control over the level from a
remote location, using the supplied lead.
INSTALLATION
Make sure the Active Wedge is firmly fixed in your vehicle. Check
before drilling or cutting holes. DO NOT work near gas tanks, fuel
lines, hydraulic lines or electrical wiring.
DO NOT mount the Active Wedge in such a way as to pinch or
damage the wires.
Make sure everything is firmly connected, before attaching the
+12V wire. Ensure the +12V wire is fused as close as possible to the
battery. Always use a fuse with the recommended rating.
CP-AW1120
750
250
32Hz - 250Hz
40Hz - 250Hz
Bass Reflex
12"
25A
567(l) x 415(w) x 384(h)
22-5/16 x 16-11/32 x 15-3/32" 32-29/32 x 16-11/32 x 15-3/32"
CP-AW2120
900
300
32Hz - 250Hz
40Hz - 250Hz
Bass Reflex
Dual 12"
30A
836(l) x 415(w) x 384(h)
WIRING
• Connect the ground wire to the vehicle first (clean dirt and paint
to bare metal).
• Connect the remote on (blue wire).
• Connect the RCA cables if applicable, OR
• Connect the speaker level wire by splicing into the headunits
speaker wires. See Note 1 on reverse.
• Connect the remote level controller with the supplied lead.
• Connect the 12 volt (red wire) to the positive battery terminal.
• Check all connections.
www.fusionelectronics.com
Advertisement
Related Manuals for Fusion Active Wedge CP-AW1120
Summary of Contents for Fusion Active Wedge CP-AW1120
- Page 1 40Hz - 250Hz 40Hz - 250Hz Tuning Bass Reflex Bass Reflex Woofer Size 12” Dual 12” Fuse 25A Dimensions (mm) 567(l) x 415(w) x 384(h) 836(l) x 415(w) x 384(h) 22-5/16 x 16-11/32 x 15-3/32” 32-29/32 x 16-11/32 x 15-3/32” DISCLAIMER Always ensure the Active Wedge is securely attached, to avoid movement. FUSION accepts no responsibility for damage or injury in relation to inappropriate securing of this product. CONTROL DESCRIPTIONS WIRING • Connect the ground wire to the vehicle first (clean dirt and paint LEVEL to bare metal). This allows the adjustment of the amplifier level of the subwoofer. • Connect the remote on (blue wire). Turn clockwise to increase the level. If the sound becomes distorted • Connect the RCA cables if applicable, OR reduce the level. • Connect the speaker level wire by splicing into the headunits speaker wires. See Note 1 on reverse. LOW PASS FILTER (LPF) • Connect the remote level controller with the supplied lead.
- Page 2 (L+) Green/White (L-) Green Connect blue wire to source unit’s accessory lead or switched 12 volt source (REM) Vehicle Battery Connect the remote Remote Level Controller level controller lead to the amplifier RECORD YOUR PURCHASE DETAILS HERE: SERIAL NUMBER DATE OF PURCHASE AFFIX RECEIPT HERE For further product and installation information, please visit www.fusionelectronics.com Pour plus d’informations sur les produits et l’installation, rendez-vous sur www.fusionelectronics.com Para obtener más información acerca de los productos y de su instalación, visite el sitio web www.fusionelectronics.com Bezoek www.fusionelectronics.com voor meer product- en installatie-informatie. Weitere Produkt- und Installationsinformationen finden Sie unter www.fusionelectronics.com Per ulteriori informazioni sui prodotti e la loro installazione, potete visitare www.fusionelectronics.com Для получения дополнительной информации о продуктах и установке зайдите, пожалуйста, на: www.fusionelectronics.com WARNING: Audio Systems can produce sound levels over 135dB. Continuous exposure to sound pressure levels over 100dB may cause permanent hearing loss! Please watch for emergency vehicles as warning signals may not be heard. USE COMMON SENSE! PUBLISHED BY FUSION ELECTRONICS LIMITED: © Copyright 2010 by FUSION Electronics Limited. All rights reserved. Specifications and design are subject to change without notice. YOU CAN HELP PROTECT THE ENVIRONMENT! Please remember to respect the local regulations: Hand in the non-working electrical equipment to an appropriate waste disposal center.