Trouble Shooting - Cecilware CT-250 Operation Manual

When cleaning, switch power off and disconnect from the outlet. If the power cord is damaged, it must be
replaced by a Cecilware Recommended Qualified Service Technician in order to avoid a hazard.
Allow the Conveyor Toaster to cool down after use before dismantling for cleaning; the unit will still be too
hot to handle immediately after use.

Trouble Shooting

If your Cecilware Conveyor Toaster does not operate, please check the following before placing a service
call.
Conveyor Toaster
Problem
The unit does not work; the
indicator light is not on.
The unit is heating but the
indicator lights are not on.
Slow heat up or no heat up,
power is on.
Conveyor is not rotating
CT-250, CT-500, CT-750
Cause
1. Mains power supply
2. Unit is not switched on
3. Dial Control or Timer
are faulty
4. Plug and lead are
damaged
5. Internal wiring fault
1. The indicator light is
faulty
1. Incorrect operation
2. Warm Up
3. Elements are faulty
4. Power dial is faulty
1. The unit is not on or
the function control is not
activated.
2. Speed Control Fault
3. Motor Fault
4. Gear/Chain Fault
6
Remedy
1. Check mains power supply.
2. Check that the unit is correctly
plugged in and turned on; ensure you
have read the manual for both for the
operations functions.
3. Call service agent
technician.
4. Call service agent
technician.
5. Call service agent
technician.
1. Call service agent
technician.
1. Ensure that you have clearly read the
manual, to understand the operating
functions.
2. Allow 5 minutes warm up period.
3. Call service agent
technician.
4. Call service agent
technician.
1. Turn the unit on and adjust function
control to required setting.
2. Call service agent
technician.
3. Call service agent
technician.
4. Call service agent
technician.
or qualified
or qualified
or qualified
or qualified
or qualified
or qualified
or qualified
or qualified
or qualified