Download Print this page

Eclipse CD2000 Installation Manual page 6

Cd multi-source receiver
Hide thumbs Also See for ECLIPSE CD2000:

Advertisement

Available languages

Available languages

Wire colors and connection points for connection wires
Never connect the power supply to the speaker wires (No.7 and No.8),
otherwise it will cause damage to the main unit.
Caution
1
ACC (Red)
Connect where the power comes on when the ignition is in the ACC position.
2
B+ (Yellow)
Connect where power is constantly available, regardless of the ignition key's position.
Ground (Black)
3
Connect where good body grounding is available.
Antenna power supply (Blue)
4
Connect to the automatic-antenna control terminal of the vehicle.
5
Illumination power supply (Orange/White)
Connect to where power comes on when the vehicle light switch is turned on.
Control power supply (Blue/White)
6
Connect the control terminal for the external amplifier, etc.
Front speaker output wires
7
Connect to the front speakers.
Rear speaker output wires
8
Connect to the rear speakers.
White:
Left +
White/black:
Gray:
Right +
Gray/Black:
Green: Left +
Green/black:
Purple: Right +
Purple/Black:
- 6 -
2
Left -
Right -
Left -
Right -

Advertisement

loading