Advertisement
Available languages
Available languages
Main unit connections
A
Front line-out terminals
Connect to the RCA connector of an external amplifier.
B
Rear line-out terminals
Connect to the RCA connector of an external amplifier.
C
Line-out terminals (Non fader)
This is used for non fader output. It can be used as a sub-woofer terminal if a separate amplifier with
a low bass filter is connected.
D
E-LAN terminal (13P)
Connect to the E-LAN terminal of the CD changer, etc.
- Vehicle connections -
Tip
• • You will need to purchase the necessary vehicle component adapter wire for the vehicle so that the
power supplies can be utilized. (Contact the dealer for further details.)
• • Be sure to wrap the connection wires with electrical tape or another insulation method to insulate them.
- Example of using vehicle adapter wires -
Power supplies
for combined
equipment
From main unit
Vehicle component adapter wires
- 7 -
Vehicle harness
Advertisement
