Table of Contents
Advertisement
8.
After the copy operation is complete, drag the drive icon to Trash.
9.
On the camera, press [ON/OFF] (Power) to turn off the camera. After
checking to make sure that the back lamp is unlit or lit red, disconnect
the USB cable.
. To view copied images
1.
Double-click the camera's drive icon.
2.
Double-click the "DCIM" folder to open it.
3.
Double-click the folder that contains the images you want to view.
4.
Double-click the image file you want to view.
• For information about file names, see "Memory Folder Structure" on page 100.
• An image that was rotated on the camera will be displayed on your Macintosh
screen in its original (unrotated) orientation.
Never use your computer to modify, delete, move, or rename any image files
that are in the camera's built-in memory or on its memory card.
Doing so can cause problems with the camera's image management data, which
will make it impossible to play back images on the camera and can drastically alter
remaining memory capacity. Whenever you want to modify, delete, move, or
rename an image, do so only on images that are stored on your computer.
IMPORTANT!
• Never unplug the USB cable, or operate the camera while viewing or storing
images. Doing so can cause data to become corrupted.
96
Using the Camera with a Computer
Advertisement
Table of Contents
