Charts And Drawings; Bias Adjustments - Cary Audio Design SLI-80 Owner's Manual

CHARTS AND DRAWINGS

Bias Adjustment
Set bias for both sides of the amplifier to 75mA.
Insert meter plug into bias jack.

Adjust for 7mA reading on DC current meter.

Re-adjust to 75mA after SLI 80 is warmed up for 10 minutes.

Remove plug and enjoy the music!

Note: Bias is factory preset; Bias should be reset when installing replacement KT-88 / 6550 tubes.
Bias Meter Jack Bias Adjust
12