This TV/DVD is equipped with a channel memory feature which allows channels to skip up or down to
the next channel set into memory, skipping over unwanted channels. Before selecting channels, they
must be programmed into the TV/DVD's memory. To use this TV/DVD with an antenna, set the TV/
CABLE menu option to the TV mode. When shipped from the factory, this menu option is in the CABLE
mode.
NOTE:
It may take a few seconds for a
digital channel picture to appear on
screen after being selected.
TV/CABLE selection
1
Press SETUP/TV MENU in the TV mode.
The TV menu screen will appear.
2
Press
or
to select
(SETUP) menu.
3
Press ▲ or ▼ to select
"TV/CABLE".
4
Press
or
to select "TV" or
"CABLE".
TV
- VHF/UHF channels
CABLE
- CABLE TV channels
5
Press EXIT to return to the normal screen.
CABLE CHART
The chart below is typical of many cable system channel allocations.
Memorizing channels
SETUP
LANGUAGE
TV/CABLE
AUTO CH MEMORY
ADD/DELETE
:SELECT
SETUP
LANGUAGE
TV/CABLE
AUTO CH MEMORY
ADD/DELETE
:SELECT
SETUP
LANGUAGE
TV/CABLE
AUTO CH MEMORY
ADD/DELETE
:SELECT
ENGLISH
CABLE
:ADJUST
ENGLISH
TV/
CABLE
:ADJUST
ENGLISH
TV/CABLE
:ADJUST
19