Security; Troubleshooting Tips; General Information - Dodge Grand Caravan Owner's Manual

Security

It is advised to erase all channels before you sell or turn
in your vehicle.
To do this, press and hold the two outside buttons for 20
seconds until the red indicator flashes. Note that all channels
will be erased. Individual channels cannot be erased.
The HomeLink Universal Transceiver is disabled when
the Vehicle Security Alarm is active.

Troubleshooting Tips

If you are having trouble programming HomeLink , here
are some of the most common solutions:
• Replace the battery in the original transmitter.
• Press the Learn Button on the Garage Door Opener to
complete the training for Rolling Code.
• Did you unplug the device for training, and remember
to plug it back in?
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 189
If you are have any problems, or require assistance,
please call toll-free 1–800–355–3515 or, on the Internet at
www.HomeLink.com for information or assistance.

General Information

This device complies with FCC rules part 15 and Industry
Canada RSS-210. Operation is subject to the following
two conditions:
1. This device may not cause harmful interference
2. This device must accept any interference that may be
received including interference that may cause undesired
operation
NOTE: The transmitter has been tested and it complies
with FCC and IC rules. Changes or modifications not
expressly approved by the party responsible for compliance
could void the user's authority to operate the device.
The term "IC:" before the certification/registration num-
ber only signifies that Industry Canada technical specifi-
cations were met.
3