Installation On A Suspended Floor; Levelling The Appliance - AEG OKO-LAVAMAT 76669 update User Information

Installation on a Suspended Floor

Suspended wooden floors are particularly susceptible to vibration. To
help prevent vibration we recommend you place a waterproof wood
panel, at least 15 mm thick under the appliance, secured to at least
2 floor beams with screws. If possible install the appliance in one of the
corners of the room, where the floor is more stable.

Levelling the Appliance

Floor unevenness can be compensated for and the height can be cor-
rected with the four adjustable screw feet. The height can be adjusted
in a range of +10 ... -5 mm.
To adjust the feet use the special spanner supplied.
0 1. Slide the special key firmly onto
the hexagon head of the
threaded foot as far as it will go.
2. Adjust the screw feet so that the
appliance is horizontal and stable.
3. Check that the appliance is level
using a spirit level.
Important. Never use strips or
shins of wood or cardboard etc.
To compensate for any uneven-
ness in the floor. Always use the
adjustable feet.
Installation and connection instructions
45