Parasound C-1002 Installation Manual

C series in-wall subwoofer

Advertisement

I N S T A L L A T I O N G U I D E
In-Wall Subwoofer
C 1002
®
www.parasound.com

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the C-1002 and is the answer not in the manual?

Questions and answers

Summary of Contents for Parasound C-1002

  • Page 1 I N S T A L L A T I O N G U I D E In-Wall Subwoofer C 1002 ® www.parasound.com...
  • Page 2: Unpacking And Installation

    Parasound in-wall and ceiling speakers mount into standard 4 inch deep stud walls. Determine the final locations for all speakers before cutting the first hole, since the position of each speak- er may affect the others, either aesthetically or acoustically.
  • Page 3 INSTALLATION INSTRUCTIONS continued Painting the C 1002 You can paint the speaker frame when painting the wall. Make sure to insert the transparent paint shield first to protect the driver and baffle. You can also paint the grill. Before painting, remote the white masking material which is attached at the corners on the rear side of the grill.
  • Page 4: Specifications

    " Above Front Surface Of Wall Height (metric) 8.5 mm Above Front Surface Of Wall ® Parasound Products, Inc. 950 Battery Street, San Francisco, CA 94111 415-397-7100 / Fax 415-397-0144 www.parasound.com Features and specifications subject © Parasound Products, Inc. 2003 to change without notice.

Table of Contents