Connecting Your Phone - Motorola Vonage VT2542 Quick Start Manual

Step 3:

Connecting your phone

1. Plug a standard telephone cord into your phone.
NOTE: If not done so already, disconnect phone cord from wall.
Plug the other end into the
2.
on the back of the Vonage Device.
NOTE: Make sure the phone light is solid.
This is what your setup should look like:
3. Pick up your handset.
You've set up your Vonage service correctly, and can now start
making calls. To configure your voicemail and other included
services features, simply login to your web account at
www.vonage.com. In Canada visit www.vonage.ca.
NOTE: When you pick up your phone to check for a dial tone, the phone light will blink.
If you do not hear a dial tone,
Tips on page 10.
Existing
Computer
Modem
(OR Router)
Vonage Device
If you hear a dial tone, congratulations!
Green Phone 1 Port
Vonage Device
proceed to Troubleshooting
Phone
7