Installing a Garage Door Opener
If you have a garage door opener, the front overhead
compartment can be used to conveniently store the
opener.
To install the garage door opener, first open the
compartment door by pressing the latch forward.
Press it firmly to the back of your garage door opener,
as close to the center of the opener as possible.
Peel the protective backing
from the hook and loop
patch.
Center the garage door opener activation button over
the console door button and press the opener firmly
into place.
Add one peg at a time until the garage door opener
operates with the compartment door closed when you
press the button.
The pegs inside the
compartment door are used
to make sure the button on
the compartment door will
contact the control button
on the garage door opener.
1-29