Advertisement
Connecting an external CD-R/RW drive
You can connect a CD-R/RW drive to the [USB HOST] port on the MR-8HD rear panel using a USB
cable, as shown below (a USB cable is not supplied with the MR-8HD).
AC-IN
AC outlet
USB 1.1A type standard
Song data which can be recorded to a CD-R/RW disc
You can record a stereo WAV file converted from two mono files on tracks 7 and 8 (final mixdowned files)
to a CD-R/RW disc in the CD-DA format. Mixdowned files on tracks 7 and 8 can be created by in either of
the following track bouncing methods.
(1)
Bouncing tracks 1 through 6 to tracks 7/8 of the same song.
(2)
Bouncing tracks 1 through 8 to tracks 7/8 of the new song.
See pages 63 through 74 of the MR-8HD owner's manual for details about track bouncing. See pages 90
and 91 of the MR-8HD owner's manual for details about how to convert files on tracks 7 and 8 to a stereo
WAV file.
Song
#####001.wav
#####002.wav
#####003.wav
#####008.wav
Song01
2 MIX
USB
USB HOST
[USB HOST] port
compatible
On the MR-8HD, a stereo WAV file converted from track 7/
8 data is stored to the "2 MIX" folder in the Song folder of
the original song (see the illustration on the left). Also see
2 MIX
page 93 of the MR-8HD owner's manual.
Only stereo WAV files in the "2 MIX" folder can be burned
*********.wav
to a CD-R/RW disc in the CD-DA format.
Therefore, you must load the song in which the desired
stereo WAV file(s) is/are stored.
Before creating an audio CD, read the <Note> on the next
page.
INPUT A SEL
GTR CLEAN
MIC/LINE
GTR DIST
DIGITAL
MIDI OUT
OUT
FOOT SW
USB cable
Song01
2 MIX
Song02
2 MIX
Song03
2 MIX
3
CD-R/RW drive
AC outlet
CD-R/RW disc
Advertisement
