Table of Contents
Advertisement
INSTALLATION
•
Your printer has a centered paper path. Therefore the paper paths of printer and TowerFeed have not to be
adjusted like for previous Brother printers.
Electrical Connections
•
Connect the RS-232 data cable to the serial port of the printer and
to the rear of TowerFeed (Fig. 10).
Note:
Secure the connectors with the screws to ensure proper
connection of the systems.
•
Connect the power cables to printer and TowerFeed (Fig. 10).
Note:
When you power on the system, power on FIRST TowerFeed and
then the printer.
Caution:
When rolling TowerFeed and printer to another place, take care
when crossing doorsteps to not have the unit tipping over or
TowerFeed trays sliding open.
IU 683 / 0404
7
Fig. 10
Connecting the Cables and
Location of the Power Switch
TM
TowerFeed
for Brother Printers
Advertisement
Table of Contents
