Monitor Operation - Brookstone talking blood Manual

516328_INS_BloodMonitor 4/26/06

MONITOR OPERATION

Setting the Date and Time
Setting the date and time allows a time stamp to be assigned to your
blood pressure measurements.
1. With the unit Off, press and hold SET until 12h flashes on
the display.
2. Press USER 1/UP or USER 2/DOWN
12- or 24-hour format.
3. Press SET again. The hour flashes on the display.
4. Press USER 1/UP or USER 2/DOWN
correct hour displays.
Or press and hold USER 1/UP
faster rate.
5. Press SET again. The minutes flash on the display.
6. Press USER 1/UP or USER 2/DOWN
correct minutes display.
Or press and hold USER 1/UP
faster rate.
7. Press SET again. The year flashes on the display.
8. Press USER 1/UP or USER 2/DOWN
correct year displays.
Or press and hold USER 1/UP
faster rate.
10
1:33 PM Page 11
to select either
incrementally until the
or USER 2/DOWN to move at a
incrementally until the
or USER 2/DOWN to move at a
incrementally until the
or USER 2/DOWN to move at a
9. Press SET again. The letters M (month) and D (day) flash on
the display.
10. Press USER 1/UP or USER 2/DOWN
date format. You can choose to have the date display as
Month/Day or Day/Month.
11. Press SET again. The month or day (depending on the format you
selected in the previous step) flashes on the display.
12. Press USER 1/UP or USER 2/DOWN
correct month or day displays.
Or press and hold USER 1/UP
faster rate.
13. Repeat steps 11-12 to finish setting the date.
14. Press SET again. mmHg flashes on the screen.
15. Press USER 1/UP or USER 2/DOWN
pressure reading format. You can choose to have your information
display as mmHg (millimeters of mercury) or kPa (kilopascals).
to select your desired
incrementally until the
or USER 2/DOWN to move at a
to select your desired
11