Answering Machine Base - BT Graphite 1500 User Manual

Answering machine base

Ans/On/Off
Switches Stop
answering Press to stop
machine on/off, playback,
page 29. page 30.
In use LED
indicator
Find / Page
Press to ring handsets
registered to the base,
page 19.
Used to register new
handsets to the base,
page 43.
Message indicator
Shows the number of messages.
If new messages have been received,
the number of new messages will be
displayed flashing.
If there are no new messages, the counter will
display the total number of old messages stored.
Two dots are activated next to the counter
digits to indicate when the line is in use.
Skip back/ Delete
Set message alert
During playback,
During playback, press deletes the
once to skip back to current message.
the beginning of
Press and hold to
the message, page 30.
delete all messages,
In standby, press to page 30.
play the current OGM,
page 33.
Press and hold to
record a new OGM,
page 32.
If you experience any problems, please call the Helpline on 0870 242 6652*
Getting to know your phone
Play
Press to play
messages,
page 29.
Skip forward Volume Down
During playback, Lower base
press to play the loudspeaker volume,
next message, page 31.
page 30.
In standby, press and
Press and hold to hold to set the time
record a memo, and weekday for the
page 30. answering machine.
In standby, press to set
call screening on or off,
page 35.
13
Volume Up
Raise base
loudspeaker volume, page 31.
In standby, press and hold to
set the Ring delay, page 34.
Battery charging
LED indicator