Table of Contents
Advertisement
Installation of the carbon filter
On delivery the carbon filter is placed
in a plastic bag to ensure the length of
life of the carbon filter. The filter
should be placed behind the grill
before the cabinet is turned on.
0
1. The cover can be opened by simultane-
ously pressing the lever on the right of
grill (1) and pulling the cover outward
(2).
2. The carbon filter is then mounted in
the slot found in the back of the cover
(3).
1
The filter should be handled carefully
so fragments don´t loosen from the
surface.
Reversing the Door
The door hinges can be changed from right (as supplied) to left if
required to suit the location where the appliance is installed.
1
Warning! Unplug from the mains before reversing the door.
0
1. Open the door and remove the
plinth cover to the front. Move
the door bearing cover on the
plinth cover from the left to the
right. Close the door.
818 20 68-00/0
13
Advertisement
Table of Contents
