A Quick Look At The Controls To... Press this key... The Source buttons A and B correspond to the source inputs on the BreatheAudio System or preferred devices. Turn the selected device on or off. Program sequences. Select the next or previous channel.
TV models. Macro device keys can be used to dedicate multiple string macro commands. Whole-Home Control is dedicated Whole-Home Control control of your BreatheAudio MUTE VOL- VOL+ ON/OFF System. MUTE, VOL-, VOL+, ON/OFF duplicate the BreatheAudio zone keypad functions.
6. If the device responds, go to step 6. If the device does not respond, press CH+. The remote will try the next code. Continue until the device responds. NOTE: Press CH- to try the previous code. 7. To set the code, press SETUP once. The LED blinks twice. 8.
Now, when you press the Macro key, the remote will send the series of commands you have entered, but only if you are in the mode you selected in step 1. For example, you could program the Macro key to turn on your tuner and select a particular channel, but only if you are in tuner mode.
Troubleshooting PROBLEM: LED does not blink when you press a key. SOLUTION: Replace battery with one new 3.3 V 2032 Lithium battery. PROBLEM: LED blinks when you press a key, but device does not respond. SOLUTION: Make sure the remote is aimed at your device and is not more than 15 feet away.
- Wipe the remote with a damp cloth to keep it looking like new. Modifying or tampering with the internal parts can cause damage and invalidate the warranty. If your remote is not performing as it should, please contact us at: www.breatheaudio.com. Specifications Power ..................(2) AAA Size (H*W*D) ........
Page 22
2395 Arbor Tech Dr. Hebron, KY 41048 Designed in USA Made in China...
Need help?
Do you have a question about the BA-LRC1 and is the answer not in the manual?
Questions and answers