Panasonic Viera VT50A series Operating Instructions Manual page 11

■
Securing the TV
Use the assembly screws
(55" / 60" / 65" class) to fasten securely.
●
Tighten the four assembly screws loosely at first, then
tighten them firmly to fix securely.
●
Carry out the work on a horizontal and level surface.
Removing the pedestal from the TV
Be sure to remove the pedestal in the following way when using the wall-hanging bracket or repacking the TV.
1 Remove the assembly screws
2 Pull out the pedestal from the TV.
3 Remove the assembly screw
4 Pull out the cover.
5 Remove the assembly screws
6 Remove the assembly screws
Adjusting the panel to your desired angle (50" class)
●
Do not place any objects within the full rotation range.
Preventing the TV from falling over
This TV could fall over if it is pushed, pulled or knocked down.
We therefore recommend the TV is secured to the furniture as illustrated.
● This measure is designed to reduce the risk of injury from a falling TV. However, it cannot guarantee protection in all
cases.
Band
Screw
Wood screw
10
(50" class) or
(50" class) or (55" / 60" / 65" class) from the TV.
from the cover.
from the bracket.
from the Back of stand and pull out the neck.
(View from the top)
Securing to a furniture
Fix pedestal and
furniture together
with band.
●
This image is
for illustrative
purposes only.
Arrow mark
10°
10°
Band
(50" class)
(55" / 60" / 65" class)
Hole for pedestal
installation
Screw
Wood screw