Table of Contents
Advertisement
Welcome!
Thank you for buying our Media Player. Please have a read of this
manual to familiarize yourself with it before use.
The Media Player's design is patented – you should consider the legal
liabilities for infringement of this copyright. The components of the
Media Player have been tested to comply with the relevant safety
standards applicable for low-voltage electronic products.
The unique serial number label on the Media Player and it's package is
required to obtain warranty service – do not remove or modify these
labels, as an illegible label may prevent us from honoring the product
warranty.
Not all operating conditions apply to the Product. We are only
responsible for quality-related after-sales service according to the
guarantee offered. We are not responsible for any data-loss or
consequential damages arising from a product failure. The Media
Player specification and contents of this manual may be amended from
time to time without prior notification.
Disclaimer
1. Our company shall not bear any responsibility for any loss due to fire,
third-party operation, theft, damage, accidents, or inappropriate uses
(such as using the Media Player for an unintended purpose), which are
not linked to our Company, or due to natural disasters like earthquakes,or storms and
other "acts of god".
2. This product is not used for commercial purposes. The use of the product will not
be liable for any commercial.
I
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Noontec V9
Summary of Contents for Noontec V9
- Page 1 Welcome! Thank you for buying our Media Player. Please have a read of this manual to familiarize yourself with it before use. The Media Player’s design is patented – you should consider the legal liabilities for infringement of this copyright. The components of the Media Player have been tested to comply with the relevant safety standards applicable for low-voltage electronic products.
- Page 2 Trademark NOONTEC is an exclusive trademark of our company. All the other trademarks or product names referred to in this Manual are trademarks or registered trademarks of our company. Trademarks of other companies are their own properties.
- Page 3 1. The components and accessories of the Media Player are tested to comply with the relevant safety standards for low-voltage electronic products. 2. The mains-power you provide to the Media Player must comply with the specification indicated on the power-pack rating plate. If you are not sure about your local mains-power supply, please contact the distributor or the power company.
- Page 4 9. Please do not physically unplug or disconnect the Media Player from your computer when it is reading or writing to the drive, otherwise the physical disk may be damaged and your data may be damaged.
-
Page 5: Table Of Contents
Contents CONTENTS ...................V BRIEF INTRODUCTION ..............1 ....................1 EATURE PRODUCT DETAILS................2 ..................2 ACKING LIST ..................3 RONT VIEW ...................4 ................4 EMOTE CONTROL BASIC OPERATION................7 ................7 OWER CONNECTION .........7 ONNECTION OF AUDIO AND VIDEO OUTPUT ...........9 ONNECTION OF RECORDING AND USAGE ..........13 ONNECTION AND SETUP OF NETWORK OPERATION OF PRODUCT USAGE..........16 ....................17 ROWSER... - Page 6 ................34 IRELESS ETUP INSTALL AND USE OF BT/SAMBA..........39 ................39 HE FIRST INSTALL ................40 ADDRESS SETTING ...............40 EIGHBOR EB INTERFACE PRODUCT SPECIFICATION............44 MAINTENANCE NOTICE..............45 FAQ......................46 OTHERS....................51...
-
Page 7: Brief Introduction
Brief introduction Feature The product is a new kind of family high-definition recorder. Via our new products, you can record favorite program randomly and store it in the device, avoiding the inconvenience brought by change tape frequently. The product can provide long recording and good watching. -
Page 8: Product Details
Internet - RJ45 port, 10/100Mbit /s, WLAN ( IEEE 802.11 b/g/n ) ,supporting internet service. Product details Packing list Check the accessories after receiving the product, below accessories should be included. -
Page 9: Front View
Front view 1） LED definition LED definition Instruction Rec LED Turns red while recording Power Power LED Turns yellow while switched on Stand-by Stand-by LED Turns red light while stand-by 2） Other definition Remote head Remote control receiver 3 in 1 Card-reader Can read MS / SD / MMC card card-reader... -
Page 10: Back View
Back View Port definition Port Port definition Instruction HDMI High definition port Can output digital signal via HDMI port Composite video Can input video and audio when AV IN input port connected to video device Optical Fine output port Can output 5.1 audio via optical port Composite video AV OUT Can output composite video and audio... - Page 11 Turn on or shut audio output MUTE Start recording in REC mode, and if press this key repeat you can select the recording time Press it and enter the STANDBY mode, be used when the STANDBY product appoint recording BROWSER Enter the browser menu Enter the Time menu to edit, add, delete recording TIMER...
- Page 12 Press to stop play/recording STOP PAUSE/STEP Press to pause play/recording, and again for step playing Press to return to previous file PREV Press to go to next file NEXT Press to fast rewind from current play and again to select the speed Press to fast forward from current play and again to select the speed...
-
Page 13: Basic Operation
Basic operation Power connection Take out power adapter from the package and connect it. Connection of TV audio and video output The product is designed with multi-output, including composite ( AV ), component ( YPbPr ) and HDMI. You can select different interface according various need. The product can detect video output automatically, making the operation friendly and convenient. - Page 14 Component output mode: Plug the YPbPr cable into the output of product and input of TV. Because the cable is only for video signal, another AV cable is necessary. Plug the red and white connector of AV cable into the audio output of product and audio input of TV or HIFI.
-
Page 15: Connection Of Recording And Usage
audio composited at the same time. Connect HDMI cable to output of product and display device with HDMI input. Select HDMI mode in TV until it displays the interface of initiation. Playback function With this HDD Recorder & player, individual can browse movie, photo and music files stored in HDD, USB, card and net work. -
Page 16: Hdd Format
B． For set-top box or satellite with only one signal output, please refer to the below connection： There are AV in, AUDIO-R, AUDIO-L and optical output in the back of product. Connect AV IN and set-top box or satellite TV receiver and make sure the output of set-top box or satellite TV receiver works well. - Page 17 least one hour, maximum 4 hours. One-hour hard disk space occupied by about 4Gb, so choose up to 4 hours of space occupied by time-lapse of about 16Gb. Step 2: Hard disk format on the remote control to select “Back “ or “Format”. Press When highlight move the “Format”...
- Page 18 2. Recording When using recording function , follow the previous connecting ways and select the option of AV IN in the guide menu. AV IN mode After correct connection of the AV-in signal, power on the set-top box (or satellite TV receiver), TV and our recorder.
-
Page 19: Connection And Setup Of Network
Connection and setup of network The product can play the files stored in the network directly through router or hub. Please connect the RJ45 cable according to the following illustration. The network connects well when the LED of network status and W/R blinks. Connect one end of the RJ45 cable to the product like the PC does and connect the video output. - Page 20 How to connect USB interface to PC This HDD Recorder & Player is also a personal multimedia files storage device and can be used by connecting to PC via USB interface. 1, Connect to the power supply While using the HDD recorder & player with PC, power supply is also needed. 2, Connect to PC with USB cable Connect the HDD Recorder &...
- Page 21 Following is the setup of media file sharing in PC Operation of file sharing under Windows XP Two conditions are necessary for a successful play of network connection. Folder sharing and safety setup . Set the same gateway and subnet mark address. Procedure of file sharing under Windows XP：...
-
Page 22: Operation Of Product Usage
Give the right to all the users after adding the Guest into the list. Select “sharing”, and then the folder is shared. Finish sharing Operate the device as the same as operate in XP system Operation of product usage Power on the Player, the system shows guide menu after a few seconds. There will be six function options, or you can enter this guide menu by press “Guide”... -
Page 23: Browser
understand the function of each option. Internet Service: Enjoying various internet service on TV. With this function, you can access to news, video , photo, weather ,and download interface on line by watching TV. You can enjoy many kinds of internet service ,without using your PC to go to the internet. File copy: Copy files from one device to another . -
Page 24: Browsing Photos
Press to select the folder containing your audio files. A thumbnail strip appears at the bottom of the screen, along with song information. Press to select the file you want to play and press ENTER. This browsing music function supports MP3, WMA, WAV, AAC, OGG, FLAC, Dolby Digital, DTS Digital…... -
Page 25: Browsing All
For example: MPEG1 (DAT, MPG) MPEG2 (VOB, MPG, TS) MPEG4 (AVI, DIVX, XVID) H.264 (AVI, MKV, MOV) RM / RMVB, FLV, ISO Note: When play the HD Video, you can according the movie resolution to adjust HD Video output. See “Creating TV System of SETUP menu” for more details. Browsing All Use the left and right navigation arrows to select the All tab. - Page 26 4. Press ENTER to delete the selected file. To cancel delete, select Return. External DVD The player supports USB connected external DVD drive. The product can play DVD through connecting to external drive by USB. Meanwhile, content in DVD can also be copied to the hard disk, and then operations like backup information and so on can be done.
- Page 27 1) Press [OPTION] into My_Shortcuts interface. Then, choose Add, Modify, Delete, Return. 2) Input Net User ID, Password, Specific File Server IP address. 3) When you complete settings, you can add a new shortcut. 4) Select it and input the password, you can browse photos, listen to music, and watch videos through the network account.
- Page 28 2/ Install software supporting UPNP gateway protocol. Before using UPNP function, you need to install software that support UPNP gateway protocol. 3/ Share documents through software settings. Open the software’s interface, choose “Media Base” in main interface, and then choose “add to the media base”...
-
Page 29: Av In
3 - When in Music mode, press [select] on remote to add files to playlist, and then press [Confirm] to save selection. 4 - Go to menu "My Playlist”, then press red button on remote control to select "All Media". 5 - In "All Media", start slideshow by pressing [Play], and the music starts automatically. -
Page 30: Timer
Format” in system menu ( “Setup Menu”). Timer Timer allows you to create, edit and delete recording schedules and view all schedule status and history. Select Timer Record from the Guide menu, there are four options: Edit, Delete, Status and History. Please press “ ” and “ ” key select. Creating a New Schedule 1. -
Page 31: Internet Services
Steps of “Timer REC” set up: Enter “Timer ” in the main menu Select “Edit” from menu and select “Add a New Schedule”, then press “ENTER” key to enter. In “Recording schedule set up” menu, find the rest available recording time according to different recording quality level. - Page 32 interface of internet services management, which includes Gougou, BBC, CNN, NPR, Flickr and Picasa. Note: the firmware of product may be updated anytime, please refer to the instruction of actual delivery. Video If you want to browse video, you just need to click the video website icon ( Such as Youku , Gougou ) on the main interface by pressing the navigation key on the remote control and pressing OK key to confirm.
- Page 33 Pause and the files’ downloading state is changed into be paused . ·RESTART: if you want to restart downloading ,firstly please choose the file, then press navigation button to choose Show All and press ENTER button, then the screen will pop the menu including three options : Delete, Restart ,Previous, then you can select Restart and the files’...
-
Page 34: File Copy
Picasa ) on the main interface by pressing the navigation key on the remote control and pressing ENTER key to confirm. Then you can enter photos management interface. For example, select the flickr photos website and press ENTER key to confirm. Then you can enter photos management interface, where you can find the titles on the upper left corner : search photos ,previous page, and next page. -
Page 35: Setup Menu
Step 5: Copy Status At top menu, select YES to copy, select No to cancel. After copy finishing, the system will display “File Copy is completed!”, or will display “File Copy failed!” Select “YES” to browse the copied files, or select “No” to return to Video. Setup Menu Select”... -
Page 36: Video Setup
Video Setup Movie Off/On, when it is on , the movie can be previewed on the lower right corner of preview the screen. Off/On. When the movies did not play at the end of the suspension, the product will Resume Play record video of the time suspended, the next player can choose "... -
Page 37: Photo Setup
NOTE: If selecting HDML LPCM/RAW, there is no signal output through optical. If selecting SPDIF LPCM/ RAW, there is no signal output through HDMI. Photo Setup Slide Show Set time interval of slide show. 2/5/10/30s, 1minutes, 2 minutes Timing Transition Select a picture transformation effects, there are eight different effects to choose. - Page 38 relationship with each other’s visit. Plug the LAN port using the cable, then input the username and Pppoe Password (provided by the ISP) in the box. Then press ENTER key to confirm. setup Then select Wired Interface to connect. When the connection is success, the system can get a IP address.
-
Page 39: Network Function
Network Function You can streaming playback the multimedia files from network and have file copy function through network. Wired Lan Setup Access the player to LAN, and press “Setting” in the remote control to enter the setting interface of the player. Select “Network” and enter “Wired Network Setting”. You can choose automatic or manual mode to do the setting. -
Page 40: Wireless Setup
is GUEST or EVERYONE and the IP address of the appointed document server is the IP address of the computer that has set network share. There can be many sharable computers in the wire network, input the IP address of the computer you want to access. - Page 41 objects. For example, the product and computers can connect and exchange data through choosing “Ad Hoc” mode without using wireless Routers. Connect the product’s antenna with a USB wireless network card, put through the antenna, and then you can set the wireless network according to the following steps.
- Page 42 If the connection is tested to be successful, save the setting. Choose the newly created shortcut to enter. Input username GUEST or EVERYONE and password, and then you can access to the appointed IP address and get the shared content in that computer.
- Page 43 IP addresses of other wireless facilities. When the above three settings are finished, press “ENTER” to save your setting and start testing. If the connection is tested to be successful, interface showing network information will be displayed. Then you can check the set parameters. When the setting of Ad Hoc wireless network for the product is finished, you need to start the wireless network function of the computers which your product needs to connect.
- Page 44 wireless network. Do remember the computer’s wireless IP address because you need to use it when the player needs to access to the computer. Enter “Network” in the homepage of the product, select “MY_SHORTCUTS” folder and enter. Press “Edit” in the remote control and choose “Add” to create a new shortcut for accessing to other computers, and then input user name, password and IP address of the appointed document server.
-
Page 45: Install And Use Of Bt/Samba
product is connected to internet. The operations for PPPoE setup as following: Step 1: Firstly use a telephone line to connect to the modem which supports PPPoE , then connect the product to the modem via RJ45 port. Step 2: Select the option “PPPoE setup” in the network setup in SETUP menu. Input the net user ID and password which are provided by telecom operators .Then press ENTER button to confirm. -
Page 46: Ip Address Setting
Step 3: Install BT/Samba Extension After format is completed, the system will install BT/Samba automatically. The system will install automaticly according the following steps. 1) Install BT/Samba Extensio 2) Install Bit-Torrent Support 3) Install Samba Server Support Installing 4) Install Web Support Installing When the installment is completed, the system will display success at the end of even steps. - Page 47 At Home page, the “Neighbor web” will display BT Player’s status and storage device. BitTorrent Download At Home page, Select “BitTorrent Download” into download interface.
- Page 48 Add new torrent Select into add new torrent file page. At “add new torrent” page, click browse key to choose torrent file path from local PC. When you select a torrent file, press “Open” key to add. Next , click “Yes” to confirm your select file and back BitTorrent download page, otherwise click “No”...
-
Page 49: Visit Neighbor
Set BT storage, Max download rate, Max upload rate and seeding setting in this setting page. When setting completed, Click to save or Click to return or Click to come back default setting. Visit neighbor At home page, select “Visit negibor” to browser the HDD files. If the player’s Login Control is on, you need to input the username is admin and the initialization password is 123. -
Page 50: Product Specification
login password can be modify at here. Please input password twice and click “Enter” to confirm. When modify is succeed, press “Confirm” at the pop menu and return. Please note the User name cannot be change. Product Specification Hard disk support Standard SATA 3.5”... -
Page 51: Maintenance Notice
Video decode：MPEG 1/2/4, Divx, Xvid, H.264, VC-1, RM/RMVB Video Format: WMV, MKV, MOV, AVI, MP4, MPG, TS/M2TS/TP/TRP, FLV, ISO, IFO, VOB, DAT, RM/RMVB Subtitle SSA, SMI, SRT, SUB, SUB+IDX Picture JPG/BMP/PNG/GIF Video record mode Surport 5 recording modes :HQ/SP/LP/EP/SLP Record image NTSC:720 X 480 , PAL: 720 X 576 Power adapter AC input: 100V～240V, 50/60HZ... -
Page 52: Faq
Q：The green icon appears but no disk symbol when the new product connects to the system. A：The new hard disk may not be formatted, please check the chapter of partition and formatting Q：The hard disk can not be recognized under Windows 2000 / Windows XP operation system. - Page 53 Q: I have connected the Player to my television. Why is no picture showing on my television or no sound coming from my television? A: This problem may have several causes. Please check the following items: Please ensure that you have selected the correct AV source on your television set.
- Page 54 password, if they are required for accessing, and also the firewall settings of your computers. Q: I want to copy files onto an external data storage device with my Player, but I always get an error message. A: To use the copy function of your Player, the device (or the partition), that you want to copy the data onto, must be formatted with one of the following file systems: FAT, FAT32, NTFS, ext3.
- Page 55 Q: How is it possible that the playback of a file from a shared folder in the network is aborted? A: The energy saving settings of the computer or the NAS interrupt the connection. If the energy saving settings of your computer or your NAS are active, then they can go into an idle state or a sleep mode even though they are being accessed via the network.
- Page 56 "TV system ". Your Player will try to automatically select the best possible video output resolution for your TV. 2).In some rare cases it is possible that not all options supported by the TV are selectable. This problem can occur when the TV is switched on from its standby mode, regardless of the current operating status of the PLAYER In order to be able to select all video output resolutions supported by your TV, disconnect your Player from the power supply and reconnect it after a few seconds.
-
Page 57: Others
Q: Why cann’t I record the TV program when I use the product? A: This problem may have several causes. Please check the following items: Please make sure that the set-top box or satellite television receiver is power on, Keep the TV with the channel you want to record programs, otherwise, the recording programs will not be what you want to record.
Need help?
Do you have a question about the V9 and is the answer not in the manual?
Questions and answers