Gigabyte GA-P55-UD6 User Manual page 58

eSATA Ctrl Mode (JMB362 Chip, eSATA Connectors on the Back Panel)
Enables or disables RAID for the SATA controller integrated in the JMB362 chip or configures the SATA
controller to AHCI mode.
IDE
AHCI
RAID
GSATA 0_1 Controller (JMB362 Chip, GSATA2_0/1 Connectors)
Enables or disables the SATA controller integrated in the JMB362 chip. (Default: Enabled)
GSATA 0_1 Ctrl Mode (JMB362 Chip, GSATA2_0/1 Connectors)
Enables or disables RAID for the SATA controller integrated in the JMB362 chip or configures the SATA
controller to AHCI mode.
IDE
AHCI
RAID
GSATA 2_3/IDE Controller (GIGABYTE SATA2 Chip, IDE and GSATA2_2/3 Connectors)
Enables or disables the IDE and SATA controller integrated in the GIGABYTE SATA2 chip. (Default: En-
abled)
GSATA 2_3/IDE Ctrl Mode (GIGABYTE SATA2 Chip, IDE and GSATA2_2/3 Connectors)
Enables or disables RAID for the SATA controller integrated in the GIGABYTE SATA2 chip or configures
the SATA controller to AHCI mode.
IDE
AHCI
RAID/IDE
Onboard Serial Port 1
Enables or disables the first serial port and specifies its base I/O address and corresponding interrupt.
Options are: Auto, 3F8/IRQ4 (default), 2F8/IRQ3, 3E8/IRQ4, 2E8/IRQ3, Disabled.
BIOS Setup
Disables RAID for the SATA controller and configures the SATA controller to IDE
mode. (Default)
Configures the SATA controller to AHCI mode. Advanced Host Controller Interface
(AHCI) is an interface specification that allows the storage driver to enable advanced
Serial ATA features such as Native Command Queuing and hot plug.
Enables RAID for the SATA controller.
Configures the SATA controller to IDE mode. (Default)
Configures the SATA controller to AHCI mode. Advanced Host Controller Interface
(AHCI) is an interface specification that allows the storage driver to enable advanced
Serial ATA features such as Native Command Queuing and hot plug.
Enables RAID for the SATA controller.
Configures the SATA controller to IDE mode. (Default)
Configures the SATA controller to AHCI mode. Advanced Host Controller Interface
(AHCI) is an interface specification that allows the storage driver to enable advanced
Serial ATA features such as Native Command Queuing and hot plug.
Enables RAID for the SATA controller; the IDE controller still operates in IDE mode.
- 58 -