Wired connection
1.
Use a network (RJ-45) cable to connect your All-in-one PC to a DSL/cable modem or a
local area network (LAN).
2.
Turn on your computer.
3.
Configure the necessary Internet connection settings.
NOTES:
•
For more details, refer to the sections Configuring a dynamic IP/PPPoE network connection
or Configuring a static IP network connection.
•
Contact your Internet Service Provider (ISP) for details or assistance in setting up your
Internet connection.
Configuring a dynamic IP/PPPoE network connection
To configure a dynamic IP/PPPoE or static IP network connection:
1.
From the Start screen, click Desktop to launch the Desktop mode.
All-in-one PC ET2300
4