Canon A550 - PowerShot Digital Camera User Manual page 53

Chapter 1
Table of What is
Contents ZoomBrowser EX?
Operating the Camera Shutter from the Computer (3/4)
Other Remote Shooting Features
Interval Timer Shooting
Interval timer shooting is the method of capturing images in
which a set number of frames is recorded at set intervals of time.
REFERENCE
• You may not be able to record at the set interval if it is too short
for the camera to transfer and save the image data.
Timer Shooting
Timer shooting is the method by which a single image is
recorded after a set number of seconds.
Click the [Shooting] menu in the
RemoteCapture Task window and select
[Timer shooting] to open a window like
the one shown here. Set the number of
seconds for the delay and click [OK]. The
timer may be set to a range from 2
seconds to 30 seconds.
ZoomBrowser EX Software User Guide
Chapter 2 Chapter 3
Downloading and What You Can Do with
Printing Images a Camera Connected
Click the [Shooting] menu in the
remote shooting window and select
[Interval Timer Shooting]. Click [OK] in
the warning message to open the
window shown to the left. Set the
values and click [Start] to start shooting.
(Interval: between 5 seconds and 60
minutes; Frames: 2 or more)
Chapter 4 Chapter 5
Viewing Images Organizing Images
Saving and Recalling Shooting Settings
You can save the current zoom settings and the settings in the
"Field angle/flash" and "Shooting settings" tabs by clicking the
[File] menu in the RemoteCapture Task window and selecting
[Save Shooting Settings].
Later when you wish to recall those settings, click the [File]
menu in the RemoteCapture Task window and select [Batch
Shooting Settings].
Displaying the Subject on the Camera's LCD Monitor
You can use the camera's LCD monitor or a television
connected to the camera to view the subject while shooting
remotely.
REFERENCE
• See the user guides for your camera for information about
connecting the camera to a TV.
Chapter 6
Using Supplementary Appendices
Features
Click the [Camera] menu in the
RemoteCapture Task window and select
[Camera Display Settings] to open a window
like the one shown here.
Select [Video Out terminal] or [Camera's
LCD monitor] and click [OK].
Back
53
Index
Next