Black Box LRB500A Quick Start Manual page 23

NET ACCESS BROADBAND ROUTER W/4-PORT SWITCH QUICK START GUIDE
2.) IP Routing (NAT Enabled) or
3.) IP Routing (NAT Disabled)
If you select IP Routing for the asynchronous port, the Setup Wizard: IP Routing
dialog box appears (see Figure 3-9).
Figure 3-9. Setup Wizard: IP Routing dialog box.
Enter the information required to dial up and log into your ISP's remote server:
• Telephone Number: Enter the phone number used to dial your remote server
(ISP).
If you must dial a number to get an outside line (for example, "9", or
"0"), enter the required number plus a "w"(wait) or a comma in the
Telephone box. (for example, 9w555-2323 or 9,,5552323) Each comma
provides a 3-4 second delay.
• User Name: Enter the User Name for your remote server or ISP account.
• Password: Enter the Password for your remote server or ISP account.
• Password Verification: Re-enter the password for your remote account.
22
NOTE