Replacing The Hard Disk Drive - Lenovo IdeaCentre Q190 Hardware Maintenance Manual

Machine types; 10115/6281
Hide thumbs Also See for IdeaCentre Q190:
Table of Contents

Advertisement

Step 6.
Lift up the computer cover as shown.
Step 7.
To install the computer cover:
a.
Line up the computer cover with the chassis as shown.
b.
Secure the computer cover to the chassis with the 4 screws.

Replacing the hard disk drive

Attention: Turn off the computer and wait 3 to 5 minutes to let it cool down before removing the cover.
Note: It may be helpful to place the computer face-down on a soft flat surface for this procedure. Lenovo
recommends that you use a blanket, towel, or other soft cloth to protect the computer screen from scratches
or other damage.
To replace the hard disk drive
Step 1.
Remove any media (disks, CDs, or memory cards) from the drives, shut down the operating
system, and turn off the computer and all attached devices.
Step 2.
Unplug all power cords from electrical outlets.
Step 3.
Disconnect all cables attached to the computer. This includes power cords, input/output (I/O)
cables, and any other cables that are connected to the computer. Refer to "Left and right view"
and "Rear view" for help with locating the various connectors.
Step 4.
Remove the computer cover. Refer to "Removing the computer cover".
Step 5.
Remove the 4 screws that secure the hard disk drive to the motherboard.
.
Chapter 8
Replacing hardware
29

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents