Olympus Stylus Verve - Stylus Verve 4MP Digital Camera Advanced Manual page 170

If a problem arises
Possible cause
The flash is set to [$].
The subject was excessively
illuminated.
The power is off.
The camera is in the shooting
mode.
No pictures have been taken.
The picture information (file
name, etc.) was changed on a
computer.
The date/time is not set.
The camera has been left with
6
the battery removed.
The camera detected a prob-
lem in the power supply from
the battery/AC adapter during
operation.
A card charged with static
electricity was inserted.
The camera was turned off
without saving the settings.
The brightness is not adjusted
properly.
The monitor is exposed to
direct sunlight.
*1 See the separate Basic manual provided.
170
The flash does not fire
The picture cannot be played back
The date recorded in the picture data is wrong
The settings are reset to the factory default settings
when the camera is turned off
The monitor is hard to see
Corrective action
Select a flash mode other than
[$].
If you want the flash to fire on a
brightly illuminated subject, set
the flash to [#].
Turn the camera ON.
Turn the mode dial to set at q or
press the QUICK VIEW button.
Record pictures before playing
back.
To avoid camera malfunction,
do not change the information
on the card with a computer.
Set the date/time. The date
and time are not set at the time
of purchase.
Set the date and time again.
The camera may stop working
if the power fails during opera-
tion. When normal operation is
restored, all the camera set-
tings may be reset. Set the
date and time again.
Set the date and time again.
Set [ALL RESET] to [OFF].
Adjust the monitor brightness.
Block the sunlight with your
hand.
Ref.
page
P.23
P.23
*1
*1
*1
–
P.86
P.86
P.86
P.86
P.88
P.109
–