Installation Procedure; Before You Start; Server Installation; Workstation Installation - Teklynx Network Information Guide User Manual

Table of Contents

Advertisement

Chapter 1 -- 4

Installation procedure

Before you
start
Note
Note
For both centralized and local installation, before installation can
begin the network administrator must first define the user group
network, specifically:
define the workstation that will act as the server on which
S
the label design software (centralized installation) or the
shared files (local installation) are to be installed;
define the license server on which License Manager and the
S
software protection key will be installed.
define the workstations, i.e. the client workstations that will
S
use the label design software.
" " " " Description of the installation stages
1

Server installation:

- Centralized: installs the label design software on the
server will the option of installing License Manager if the
server is supporting the software protection key.
OR
- Local: installs the label design software shared files on the
server with the option of installing License Manager if the
server is supporting the software protection key.
2

Workstation installation:

- Centralized: installs the links to server on the client
workstations with the option of installing License Manager
on the workstation supporting the software protection key.
OR
- Local: installs the label design software on the worksta-
tions with the option of installing License Manager on the
workstation supporting the software protection key.
If you decide to install License Manager on the server, you
will need to carry out a workstation installation on the server in
order for the software protection key to be recognized.
" " " " Access rights required for installation
You will need all access rights to the folder on the server in
which the software is to be installed. In the same way, you will
also need administrator rights on one of the workstations. If you
do not have administrator rights, your network administrator will
first need to create the [base] folder and give you full access
rights to it.
[base] refers to the folder in which you install the label design
software. You can rename it as required.
Network Information Guide

Advertisement

Table of Contents
loading

Table of Contents