Advertisement
®
Thank you
for buying a Black & Decker paper shredder. Black & Decker paper
shredders have become the benchmark for innovation, performance and quality
to protect against identity theft. We have taken great care in designing and
engineering a product to meet and exceed your needs.
To ensure years of safe, efficient performance, please read
these important product usage and safety instructions.
If you have any questions regarding the product, please feel free to
call toll-free 1-800-297-5028.
Product Information
This product is built to shred paper, staples, and small paper clips. It is not built to shred
large paper clips, continuous forms, adhesive labels, transparencies, newspaper, cardboard
or other plastic. Using it for these purposes is likely to cause irreparable damage.
1
power
switch
(on back)
function
switch
pull out
bin
sliding
stability foot
The Following are Important Safety Instructions.
Read All Instructions Before Using.
W A R N I N G
WARNING: Hazardous moving parts. Keep fingers and other
body parts away.
WARNING: To reduce risk of fire, electrical shock or injury:
NEVER allow children to operate a paper shredder, even
under adult supervision. A paper shredder is NOT a toy.
DO NOT use flammable synthetic oil, petroleum-based
products or aerosols of any kind on or near product at any time.
DO NOT operate any electrical product with a damaged cord.
AVOID getting jewelry, hair or loose clothing too close
to feed slot as serious injury can occur.
DO NOT handle plug or product with wet hands.
KEEP children and pets away from the shredder.
UNPLUG shredder when not in use.
DO NOT attempt to feed more sheets of paper than
specified on the feeder.
DO NOT open shredder head to attempt repair: It could expose
you to electric shock and will void your warranty.
DO NOT attempt to shred materials other than paper.
The socket-outlet shall be installed near the equipment and
shall be easily accessible.
SKU #CC500/#CC501
2
Sheet capacity: 5 20 lb. pages in one pass
Paper Shred Size: .16" x 1.38"
4mm x 35mm
3
Voltage: 120
4
KEEP OUT OF REACH OF CHILDREN
ALWAYS empty the wastebasket prior
to becoming full.
DO NOT place shredder near heat or
water source.
WARNING ICONS: The icons
on top of the shredder warn the
user of the potential dangers
if the shredder is used improperly.
KEEP
CHILDREN
NO FLAMMABLE
AWAY
CLEANING AGENTS
NO PAPER
NO HANDS
CLIPS
OR FINGERS
Setup
• Check shredder for damage or defects; some particles of paper are normal due to product testing.
• Plug the power cord into any easily reached standard outlet.
• To use, have the Power Switch (1), located on the back of the shredder, in the ON (–) position.
• Place allotted amount of paper into the shredder.
• Press the Function Switch (2) to the AUTO (I) position.
• (I) indicates Forward, (II) indicates Reverse, (O) indicates the Off position.
Customer Service
Black & Decker has a toll-free help line for customers living in the United States
and Canada. Our customer service phone number is 1-800-297-5028 or visit our website
at www.blackanddeckershredders.com.
Maintenance
Regular emptying of the basket is important to ensure the smooth operation of the cutting
cylinders. The shredder will not operate when the basket is full. Regular oiling is also
necessary for proper performance. It is recommended to use shredder oil every few weeks.
Troubleshooting
If you have a problem with your shredder, check the symptoms and remedies below.
If you cannot solve the problem this way, contact Black & Decker paper shredders Customer
Service. Do not open shredder head to attempt repair: It could expose you to electric
shock and will void your warranty.
Symptom
Shredder does not start
or stops while shredding.
Paper jam.
NO LOOSE
Shredder squeaks, grinds
CLOTHING
or runs below capacity.
NO HAIR
Shredder continues to run
for 2 or 4 seconds after
shredding has been
completed.
®
SKU #CC500/#CC501
Remedy
- Make sure shredder is plugged in and Power Switch (1) is
in the ON (–) position.
- Wait 30 minutes for shredder to cool down before trying again.
In case of a paper jam, which may occur if the sheet capacity is
exceeded or if the paper is not put in straight. To clear a jam:
1. Move the Function Switch (2) to the REV (II) position.
The shredder will reverse to clear the jam.
2. If the shredder jams in reverse, move the Function Switch (2)
to the AUTO (I) and allow it to run for about 5 seconds.
3. If the jam still does not clear, unplug shredder and carefully
grasp the paper and pull out slowly.
4. Once the jam is cleared, plug in and move the Function
Switch to AUTO (I) for continued shredding or OFF (O) if
shredding is complete.
- Check to see if bin is full. If bin is full, follow instructions
under maintenance.
- Oil cutting cylinder.
- No action required.
This is a self-cleaning function.
Advertisement
