Pair The S4 With Your Phone - Blueant S4 User Manual

Pair the S4 with your Phone

To use the S4 you need to pair it with your phone.
1. Slide the power switch on the side of the S4 to the ON position.
2. If this is the fi rst time you have used the S4 it will go straight to pairing mode. The voice prompts will start to
talk you through the pairing process and the light will fl ash blue.
For subsequent pairings, say
say Pair Me.
3. Follow the voice prompts to pair the S4 with your phone. The pairing code is
Transfer your Phonebook
Once the pairing is complete your S4 will attempt to transfer the contacts from your phonebook so that it can
announce the names of incoming callers.
Note: If your phone prompts you to allow a connection to the S4, you
8
BlueAnt Speak To Me, wait for the S4 to ask you to Say A Command
0000 (four zeros).
must select "YES" or "OK".
and then