Environmental Concerns - AEG 210621236-11052010 User Manual

20

Environmental concerns

10. Remove the handle. Unscrew the top
handle bracket from the handle rod
(h1). Unscrew the bottom handle brack-
et from the door (h2)
Unscrew the top handle bracket from
the door (h3).
11. Install the handle in the opposite side.
Re-screw the handle bracket on the
door (h4). Turn the handle bracket with
the handle and screw them to the door
(h5) and the fitted handle bracket (h6).
12. Re-insert the lower door on the lower
hinge pivot (b2).
13. Insert the middle hinge (m2) into the
left drill of the lower door.
14. Unscrew the upper hinge pivot (t1) and
place it on the opposite side.
15. Fit the upper door on the upper door
pivot.
16. Re-insert the upper door on the middle
hinge pivot (m5) slightly tilting both
doors.
17. Re-screw the middle hinge (m2). Do
not forget the plastic spacer (m1).
Do a final check to make sure that:
• All screws are tightened.
• The magnetic seal adheres to the cabinet.
• The door opens and closes correctly.
If the ambient temperature is cold (i.e. in Winter), the gasket may not fit perfectly to the
cabinet. In that case, wait for the natural fitting of the gasket.
In case you do not want to carry out the above mentioned operations, contact the near-
est After Sales Service Force. The After Sales Service specialist will carry out the reversibil-
ity of the doors at your cost.
ENVIRONMENTAL CONCERNS
The symbol
be treated as household waste. Instead it should be taken to the appropriate collection
point for the recycling of electrical and electronic equipment. By ensuring this product is
disposed of correctly, you will help prevent potential negative consequences for the
environment and human health, which could otherwise be caused by inappropriate
waste handling of this product. For more detailed information about recycling of this
product, please contact your local council, your household waste disposal service or the
shop where you purchased the product.
on the product or on its packaging indicates that this product may not
h1 h2
h4 h5
h3
h6
t1