Features - Magnavox 40MF401B Owner's Manual

18
Channel List
The channels selected here can be skipped when selecting the
channels using CH + / −.
Those channels can still be selected with the Number buttons.
1
Use ▲/▼ to select [Channel List], then press OK.
2
Use ▲/▼ to select the channel you want to remove, then
press OK.
Picture
Sound
Setup
Highlight channels for

Features

Ch Up / Down key selection.
Language
USB
• The channel display for the removed channel darkens.
You will not be able to select the channel again using
CH + / −.
• To reactivate a removed channel, use ▲/▼ and press
OK. The registered channels are highlighted.
• When you remove a main channel, its subchannels are
removed as well.
Note
• The channel with the [DTV] indicated on the display is ATSC.
Otherwise the channel is NTSC.
Add Channels
This function lets you add the off the air along NTSC or analog
Cable channels that were not added by the autoprogram due
to reception conditions at the initial setting.
1
Use ▲/▼ to select [Add Channels], then press OK.
2
Use the Number buttons to enter the number of the
channel you want to add, then press OK.
Picture
Sound
For analog channels, select a
channel to be added using
Setup
number keys.
Features
For digital channels, you must
perform Autoprogram function.
Language
USB
Note
• If setup completes successfully, [Added to the channel list.] is
displayed.
• If external input is used, it is not possible to register the channel
and [Unavailable] will be displayed on the TV screen.
• By using CH+ / −, you can select the memorized channels only.
DTV
DTV
DTV
BACK
Ch Select Watch / Skip Back
OK
Add channels
BACK
Ch Change Back
Antenna Confi rmation
ATSC
This function lets you check the digital signal strength of each
channel.
1
Use ▲/▼ to select [Antenna], then press OK.
2
Use the Number buttons or CH + / − to select the
channel for which you want to check the digital signal
strength.
11.1
11.2
11.3
Picture
Sound
Setup
Features
Language
USB
Note
• If the channel is set to analog channel or external input, you
cannot confi rm the antenna condition.
Features
1
Use ▲/▼ to select the item you want to adjust, then press
OK.
Picture
Sound
Setup
Features
Language
USB
11
2
Adjust the following items.
Back
Current 50 Max 50
Ch Change
Closed Caption
Child Lock
ECO On
fun-Link (HDMI CEC)
Location Home
E-Sticker - -
Current Software Info
11.1