Remote Control; First Time Setup - Panasonic Viera TC-L32B6 Owner's Manual

Remote control

MEDIA
PLAYER
1
2
3
4
5
OPTION
6
7
8
9
10
11
1無 POWER - Switches TV On or Off.
2無 MEDIA PLAYER - Viewing media contents from a USB.
3無 MENU - Press to display the menu screen .
4無 INFO - Displays TV status information as well as
program details.
5無 SLEEP - Accesses the sleep timer.
6無 OPTION - Displays Options menu for special functions
(when available)
7無 COLOR KEY - Red/Green/Yellow/Blue key for various function.
8無 Volume Up / Down (VOL+ / - ) - Press to decrease or
increase the audio volume.
9無 MUTE - Turns off/on the sound.
10無 Channel Numbers - Directly tune channels.
11無 - Use for digital channels.
12無 CC - Switches the Closed Caption mode On or Off.
SAP - Select the Audio mode for watching TV. (SAP :
13無
Secondary Audio Programming).
14無 INPUT - Select input sources "ANT/Cable in", "HDMI 1",
"HDMI 2", "Component", "Video" by pressing INPUT button
on Remote Control.
15無 EXIT - Exit from the menu screen.
16無 FAVORITE - Accesses the favorite channels.
17無 OK / - Selects/OK/Change.
18無 RETURN - Press to return to previous menu.
19無 Channel Up / Down (CH
last or next channel.
20無 FORMAT - To cycle through the aspect ratio modes.
21無 LAST - Switches to previously viewed channel or input.
12
CC SAP
13
14
15
16
17
18
19
20
21
V
/ ) - Press to switch to the
V

First Time Setup

First time setup screen is only displayed automatically after
the power cord is inserted into a wall outlet and the TV is
turned on for the first time.
 Turn the TV On with the "POWER" button
 Select your language
English/Español/Français
 Set viewing mode
1無 Select your viewing mode (Be sure to select "Home use")
2無 Please confirm your selection (Home use) before pressing
the OK button.
z
If you select " Store demonstration" by mistake in "Set viewing
mode", confirmation screen will be displayed.
• Select "No" and return to previous screen "Set viewing
mode".
• If you select "Yes", screen enters the store
demonstration mode.
z
To display the "Set viewing mode" screen again as shown
Home use
above and select "
in the " Setup " menu.
• If you perform "Reset to defaults", please do not unplug
the AC Cord while the TV is being reset.
 ANT/Cable setup (Auto channel setup)
1無 Select signal type "Over-the-Air" or "Cable service".
2無 Select "Auto program" and start scanning, the channel
scanning starts.
 Finished First time setup.
Congratulations! Setup is complete.
To watch TV via a Cable box, Satellite receiver, or any other
source (DVD, DVR, gaming device, etc.), press the INPUT
button and select the appropriate input.
Note:
z
If you turn the TV off before completing "First time setup", the
initial setup will not launch again the next time you power on
the unit.
z
You can repeat "First time setup" by selecting "Reset to
defaults" in the "Setup" menu.
z
After "First time setup", you can also change "Language"
and "ANT/Cable setting" from the "Setup" and "TV" menus
respectively.
z
About broadcasting systems
Analog (NTSC): Conventional broadcasting
Digital (ATSC): Digital TV Standards include digital high-
definition television (HDTV), standard-definition television
(SDTV), data broadcasting, multi-channel surround sound
audio and interactive television.
Reset to defaults
", perform " "
7