Download Print this page

SkyLink 18TR Manual page 2

Garage door remote control

Advertisement

4. PROGRAM A TRANSMITTER TO THE RECEIVER (CONT)
1
Plug the receiver into an electrical socket.
2
Press and hold the learn button on the left hand side of the receiver.
The red LED on the receiver will flash.
3
Press the assigned button (either button A or B) of the transmitter
you want to program to the receiver.
4
The receiver red LED will go off indicates the programming is completed.
To program a transmitter to control another receiver, repeat process
5
(1) to (4) but pressing another button (A or B).
5. REMOVE TRANSMITTER FROM THE RECEIVER
You can delete the transmitter from a receiver.
1
Unplug the receiver from the electrical socket.
2
Press and hold the learn button on the left hand side of the receiver
when plugging the receiver into an electrical socket, the red LED on the
receiver will flash rapidly. All the transmitters and keypads are deleted.
12 volt alkaline battery (size 23A)
(included).
It is time to change the battery
when the red LED on the trans-
mitter does not turn on when
either button is pressed.
7. ADDITIONAL RECEIVER
There are 2 buttons on your transmitter, the other
button can be used to control another Skylink
Door Receiver Model 18R (sold separately) or Skylink
Wireless Switch Receiver Model SW-18R (sold
separately).
8. ADDITIONAL TRANSMITTER
You can add up to 15 transmitters as you want to
control the same receiver. Simply program the
transmitters to the receiver. Skylink
Transmitter Model 18T4 and Keyless Entry Transmitter
Model 18K to work with your receiver. For more
information, please visit our website at
www.skylinkhome.com or contact us.
9. CAUTION
RISK OF ELECTRICAL SHOCK. FOR INDOOR USE ONLY.
CAUTION : DISCONNECT POWER BEFORE SERVICING.
Maximum Rating:
Input : 120VAC 60Hz 2W
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) This device must accept any interference
received, including interference that may cause undesired operation.
WARNING:
Changes or modifications to this unit not expressly approved by the party responsible for compliance could
void the user's authority to operate the equipment.
NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference
to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
6. BATTERY
®
Garage
®
®
offers Keychain
10. FCC
If, within one year from date of purchase, this product should become defective
(except battery), due to faulty workmanship or materials, it will be repaired or
replaced, without charge. Proof of purchase and a Return Authorization are required.
12. CUSTOMER SERVICE
If you would like to order Skylink's products or have difficulty getting them to work,
please :
1. visit our FAQ website at www.skylinkhome.com , or
2. email us at support@skylinkhome.com , or
3. call our toll free at 1-800-304-1187 from Monday to Friday, 9 am to 5 pm EST.
Fax +800 286-1320
CUSTOMER SERVICE
17 Sheard Avenue, Brampton, Ontario, Canada L6Y 1J3
Email:support@skylinkhome.com
http://www.skylinkhome.com
P/N. 101A287-001 Rev.1
US Patent. D380895
©2004 SKYLINK GROUP
11. WARRANTY

Advertisement

loading