Basic Operation; Turning Tv On/Off; Select Source - AWA CM-P42PCN Operation Manual

Turning the TV On/Off
Press the Power button on the remote control. The TV will turn on and you will be ready to use its features.
You can also use the Power button on the front panel.

Select Source

Press TV/AV button to enter source select menu and press
button to switch signal source.
Source Select
TV
AV1
AV2
SVIDEO
COMPONENT1
COMPONENT2
VGA
HDMI
Press MENU button on the remote control to display main menu.
1
2 Press button to highlight the desired menu/item.
3 Press button to enter into selected menu/itm.
Press MENU button to go back.
4
5 Press button to change the settings.
Press MENU or EXIT button to exist menu.
6
Select DVB to watch DTV and refer to operation on page 34 (optional).
7
Notice
• Don't keep fixed image in order to prevent burn-in effect, even TV will be turned off automatically in case of no signal
more than 5min.

Basic Operation

button to select input signal, then press
23