Gigabyte GA-P67A-UD7 User Manual page 24

Quick Buttons
This motherboard has 3 quick buttons: power button, reset button and clearing CMOS button. The power
button and reset button allow users to quickly turn on/off or reset the computer in an open-case environment
when they want to change hardware components or conduct hardware testing. Use the clearing CMOS but-
ton to clear the CMOS values (e.g. date information and BIOS configurations) and reset the CMOS values to
factory defaults when needed.
• Always turn off your computer and unplug the power cord from the power outlet before clear-
ing the CMOS values.
• After system restart, go to BIOS Setup to load factory defaults (select Load Optimized
Defaults) or manually configure the BIOS settings (refer to Chapter 2, "BIOS Setup," for BIOS
configurations).
PHASE LED
The number of lighted LEDs indicates the CPU loading. The higher the CPU loading, the more the number of
lighted LEDs. To enable the Phase LED display function, please first enable Dynamic Energy Saver 2. Refer
to Chapter 4, "Dynamic Energy Saver
Hardware Installation
PW_SW: Power button
RST_SW: Reset button
CMOS_SW: Clearing CMOS button
2," for more details.
™
- 24 -