Table of Contents
Advertisement
Quick Links
INTERNATIONAL LIMITED WARRANTY
ARX Systems (ARX) warrants to the first purchaser of any ARX equipment that it is
free from defects in materials and workmanship under normal use and service. ARX's
sole obligation under this warranty shall be to provide, without charge, parts and
labour necessary to remedy defects, if any, which appear within twelve (12) months
from date of purchase, and for a further twelve (12) months supply parts only.
This is our only warranty. It does not cover finish or appearance items, or if the
equipment has been, in ARX's sole judgement:
•Subjected to misuse, abuse, negligence or accident;
•Repaired, worked on, or altered by persons not authorized by ARX;
•Connected, installed, adjusted or used for a purpose other than that for which
it was designed.
This warranty gives you and us specific legal rights and you may also have other
rights which may apply.
Warranty Service Procedure
Should it become necessary to have your equipment serviced under the terms of
the warranty, please follow these steps:
1.
Call your ARX distributor for a Return Authorization (RA) number;
2.
Carefully repack the unit, in its original packaging where possible,
including a note with a description of the problem, and a copy of the
receipt showing date of purchase. Attach these to the actual unit itself.
Don't forget to write your name and address clearly, and include a phone
number where you can be contacted during normal business hours. Make
it easy for our service technicians to contact you if they have a question.
Also, use plenty of packing material - better to be safe than sorry.
3.
Send the unit freight prepaid to ARX Systems, at the address given you
with your RA number. We will pay the return freight when the serviced
unit is returned to you.
4.
We strongly recommend you insure the package. We can't fix it if it gets
lost! Send it by UPS, Fedex, or any similar service that can track the
package. Parcel Post is not recommended
If Warranty Registration Card is missing, please write to ARX in the country of
purchase, stating model and where purchased, or to ARX, PO Box 15, Cheltenham,
Victoria 3192, Australia.
Or you can Email us at: info@arx.com.au
8
MSX 4/MPS 1 Owner's Manual v 1.4CE ©1997 ARX®
MSX 4
Active Microphone
Splitter
MPS 1
Dual Power
Supply
OWNER'S
MANUAL
MSX 4/MPS 1 Owner's Manual v 1.4CE ©1997 ARX®
1
Advertisement
Table of Contents
Related Manuals for ARX MSX 4
Summary of Contents for ARX MSX 4
- Page 1 INTERNATIONAL LIMITED WARRANTY ARX Systems (ARX) warrants to the first purchaser of any ARX equipment that it is MSX 4 free from defects in materials and workmanship under normal use and service. ARX’s sole obligation under this warranty shall be to provide, without charge, parts and...
- Page 2 55013 : 1990, Sections 3.2 and 3.5 EN 55020 : 1988, Sections 4.3, Weight 5.4, 6.2, 7.0, 8.0. 5 lbs (2.2 Kg) MSX 4/MPS 1 Owner's Manual v 1.4CE ©1997 ARX® MSX 4/MPS 1 Owner's Manual v 1.4CE ©1997 ARX®...
- Page 3 • Listen function headphone socket if required. Ideally these should be installed at the time of ordering the unit(s), but they are available as a retrofittable kit. Contact ARX directly or the dealer at your MPS 1 Rear Panel Connectors point of sale for further information on obtaining a tranformer balancing kit.
- Page 4 Introduction Power Connections Thank you for choosing this MSX 4 Active Microphone Splitter. As with all ARX The MSX 4 is designed to be used with the MPS 1 Dual Power Supply only. This unit equipment, it has undergone extensive factory calibration and ‘burn in’ before has two completely independent power supplies inside, and both 6 pin connectors shipping.
Need help?
Do you have a question about the MSX 4 and is the answer not in the manual?
Questions and answers