Gigabyte GA-P67A-UD3R-B3 User Manual page 39

Command Rate(CMD)
Options are: Auto (default), 1~3.
>>>>> Channel A/B Misc Timing Control
IO Latency
Options are: Auto (default), 1~31.
Round Trip Latency
Options are: Auto (default), 1~255.
 Advanced Voltage Settings
CMOS Setup Utility-Copyright (C) 1984-2010 Award Software
****** Mother Board Voltage Control ******
Voltage Types
-----------------------------------------------------------------------------
>>> CPU
Load-Line Calibration
CPU Vcore
x Dynamic Vcore(DVID)
QPI/Vtt Voltage
System Agent Voltage
>>> MCH/ICH
PCH Core
CPU PLL
>>> DRAM
DRAM Voltage
DRAM VRef.
DRAM Termination
Ch-A Data VRef.
Ch-B Data VRef.
Ch-A Address VRef.
Ch-B Address VRef.
higf: Move Enter: Select
F5: Previous Values
>>> CPU
Load-Line Calibration
Enables or disables Load-Line Calibration. Enabling this feature adjusts Vdroop, keeping the CPU
voltage more constant under light and heavy CPU load. Disabled sets the CPU voltage following Intel
specifications. (Default: Auto)
Note: Enabling Load-Line Calibration may result in damage to your CPU or reduce the useful life of the
CPU.
CPU Vcore
The default is Auto.
Dynamic Vcore(DVID)
This option is configurable only when CPU Vcore is set to Normal. The default is Auto.
QPI/Vtt Voltage
The default is Auto.
System Agent Voltage
The default is Auto.
>>> MCH/ICH
PCH Core
The default is Auto.
CPU PLL
The default is Auto.
Advanced Voltage Settings
Normal Current
[Auto]
1.250V [Auto]
+0.000V Auto
1.050V [Auto]
0.920V [Auto]
1.050V [Auto]
1.800V [Auto]
1.500V [Auto]
0.750V [Auto]
0.750V [Auto]
0.750V [Auto]
0.750V [Auto]
0.750V [Auto]
0.750V [Auto]
+/-/PU/PD: Value F10: Save
F6: Fail-Safe Defaults
- 39 -
Item Help
Menu Level 
ESC: Exit F1: General Help
F7: Optimized Defaults
BIOS Setup