Gigabyte GA-P67A-UD5 User Manual page 100

Step 3:
The BGA Rebuild item in the Information block will display the current rebuild progress. After the rebuild is
complete, the Status will display as Functional. Please note the rebuild will be stopped if you exit the RAID
BIOS screen before the rebuild is complete.
Marvell BIOS Setup (c) 2009 Marvell Technology Group Ltd.
Topology
HBA 0 : Marvell 0
Virtual Disks
VD 0: New_VD
PD 0: WDC WD800JD-22L
PD 8: WDC WD800JD-22L
Free Physical Disks
Help
Virtual Disk: A set of disk blocks presented to an operating environment as
a range of consecutively numbered logical blocks with disk-like storage.
ENTER: Operation F10: Exit/Save ESC: Return
Resume the Stopped Rebuild Process
To resume the stopped rebuild process, enter the eSATA3 RAID Configuration menu in BIOS Setup again.
Move the selection bar to the array to be rebuilt (for example, VD 0: New_VD). Press <Enter> on this array
and select BGA Resume. Press <Enter> again to continue the rebuild process.
Marvell BIOS Setup (c) 2009 Marvell Technology Group Ltd.
Topology
HBA 0 : Marvell 0
Virtual Disks
VD 0: New_VD
PD 0: WDC WD800JD-22L
PD 8: WDC WD800JD-22L
Free Physical Disks
Help
Virtual Disk: A set of disk blocks presented to an operating environment as
a range of consecutively numbered logical blocks with disk-like storage.
ENTER: Operation F10: Exit/Save ESC: Return
Appendix
Information
ID
Name
Status
Stripe Size
RAID Mode
Size
BGA Status
BGA Rebuild
Number of PDs
Numbers
Information
ID
Name
Status
Stripe Size
[Delete]
RAID Mode
[BGA Resume]
Size
BGA Status
BGA Rebuild
Number of PDs
Numbers
- 100 -
: 0
: New_VD
: Degrade
: 64K
: RAID1
: 75776MB
: Running
: 27%
: 2
: 0 8
: 0
: New_VD
: Degrade
: 64K
: RAID1
: 75776MB
: Paused
: 20%
: 2
: 0 8