Standard Cmos Features - Gigabyte GA-H55N-USB3 User Manual

Lga1156 socket motherboard
Hide thumbs Also See for GA-H55N-USB3:
Table of Contents

Advertisement

2-4

Standard CMOS Features

Date (mm:dd:yy)
Time (hh:mm:ss)
 IDE Channel 0 Master
 IDE Channel 0 Slave
 IDE Channel 1 Master
 IDE Channel 1 Slave
 IDE Channel 3 Master
Halt On
Base Memory
Extended Memory
Total Memory
higf : Move
Enter: Select
F5: Previous Values
Date (mm:dd:yy)
Sets the system date. The date format is week (read-only), month, date and year. Select the desired field
and use the up arrow or down arrow key to set the date.
Time (hh:mm:ss)
Sets the system time. For example, 1 p.m. is 13:0:0. Select the desired field and use the up arrow or
down arrow key to set the time.
IDE Channel 0, 1 Master/Slave
IDE Channel 0, 1 Master/Slave
Configure your IDE/SATA devices by using one of the three methods below:
• Auto
• None
• Manual
Access Mode
IDE Channel 3 Master
Extended IDE Drive
Configure your IDE/SATA devices by using one of the two methods below:
• Auto
• None
Access Mode
The following fields display your hard drive specifications. If you wish to enter the parameters manually,
refer to the information on the hard drive.
Capacity
Cylinder
Head
BIOS Setup
CMOS Setup Utility-Copyright (C) 1984-2010 Award Software
Standard CMOS Features
+/-/PU/PD: Value
F6: Fail-Safe Defaults
Lets the BIOS automatically detect IDE/SATA devices during the POST. (Default)
If no IDE/SATA devices are used, set this item to None so the system will skip
the detection of the device during the POST for faster system startup.
Allows you to manually enter the specifications of the hard drive when the hard
drive access mode is set to CHS.
Sets the hard drive access mode. Options are: Auto (default), CHS, LBA, Large.
Lets the BIOS automatically detect IDE/SATA devices during the POST. (Default)
If no IDE/SATA devices are used, set this item to None so the system will skip
the detection of the device during the POST for faster system startup.
Sets the hard drive access mode. Options are: Auto (default), Large.
Approximate capacity of the currently installed hard drive.
Number of cylinders.
Number of heads.
Fri,
Mar 12 2010
22:31:24
[None]
[None]
[None]
[None]
[None]
[All, But Keyboard]
640K
827M
832M
F10: Save
- 44 -
Item Help
Menu Level 
ESC: Exit
F1: General Help
F7: Optimized Defaults

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents