Table of Contents
Advertisement
The BAY Button
Press this button to power on and power off the GPS
Module or TV Tuner Module. Powering on the GPS
Module or TV Tuner Module by pressing this button
does not automatically activate the respective functions.
After powering on, you need to activate the function
through Windows™. This button would work only when
the system is powered on, and either one of the GPS
or TV Tuner Module is connected into the system unit.
Note: GPS and TV Tuner Modules are optional and
need to be purchased separately. For details on how to
connect these modules to the system unit, please refer
to Chapter 4.
Note: The proper way to activate the above devices and modules
is as below:
1) Press the above buttons to power on the devices, and modules.
2) Activate the respective application programs in Windows™.
The effective range of the system Bluetooth
Note: The Four Communication Buttons are located between
the left/right keyboards. For exact location, please refer to the Top
View diagram in Chapter 1.2.
is 10 meters.
®
8 8
1.7 Attention On Media Card Slot
Media Slot Door is
now inserted into the
system unit.
The Media Slot Door is
now taken out from the
system unit.
Please observe below safety measures:
• When no card (SD/SD-IO cards) is inserted into the media
slot, make sure this slot is covered by the "media slot door" as
supplied together with this Ultra Mobile PC. The purpose of this
"media slot door" is to prevent foreign matters from entering into
the system unit through this slot, when no card is inserted. When
inserting this "media slot door", please make sure the arrow is on
the topside as shown above. Inserting this door upside down may
cause damage to your Ultra Mobile PC.
Arrow on topside
of Media Slot
Door.
Advertisement
Table of Contents
