Gigabyte GA-P67A-UD7-B3 User Manual page 11

Storage Interface 2 x Marvell 88SE9128 chips:
Š
- 2 x SATA 6Gb/s connectors (GSATA3_6, GSATA3_7) supporting up to 2
SATA 6Gb/s devices
- Support for SATA RAID 0 and RAID 1
- 2 x eSATA 6Gb/s connectors (eSATA/USB Combo) on the back panel
supporting up to 2 SATA 6Gb/s devices
- Support for SATA RAID 0 and RAID 1
USB Chipset:
Š
- Up to 8 USB 2.0/1.1 ports (4 on the back panel, including 2 eSATA/USB
Combo, 4 via the USB brackets connected to the internal USB headers)
2 x Renesas D720200 chips and 2 x VLI VL810 hubs:
Š
- Up to 10 USB 3.0/2.0 ports (6 on the back panel, 4 via the USB brackets
connected to the internal USB headers)
* The USB 2.0 signals of the 6 USB 3.0/2.0 ports on the back panel are from the
IEEE 1394 T.I. TSB43AB23 chip:
Š
- Up to 3 IEEE 1394a ports (2 on the back panel, 1 via the IEEE 1394a bracket
connected to the internal IEEE 1394a header)
Internal 1 x 24-pin ATX main power connector
Š
1 x 8-pin ATX 12V power connector
Connectors
Š
4 x SATA 6Gb/s connectors
Š
4 x SATA 3Gb/s connectors
Š
1 x CPU fan header
Š
3 x system fan headers
Š
1 x power fan header
Š
1 x Chipset fan header
Š
1 x front panel header
Š
1 x front panel audio header
Š
1 x S/PDIF Out header
Š
2 x USB 2.0/1.1 headers
Š
2 x USB 3.0/2.0 headers
Š
1 x IEEE 1394a header
Š
1 x clearing CMOS button
Š
1 x power button
Š
1 x reset button
Š
Back Panel 1 x PS/2 keyboard/mouse port
Š
1 x optical S/PDIF Out connector
Connectors
Š
1 x coaxial S/PDIF Out connector
Š
2 x IEEE 1394a ports
Š
2 x USB 2.0/1.1 ports
Š
6 x USB 3.0/2.0 ports
Š
2 x eSATA/USB Combo connectors
Š
2 x RJ-45 ports
Š
6 x audio jacks (Center/Subwoofer Speaker Out/Rear Speaker Out/Side Speaker
Š
Out/Line In/Line Out/Microphone)
Chipset.
- 11 - Hardware Installation