Gigabyte GA-H57M-USB3 User Manual page 106

• Rebuilding in the operating system
Make sure the GIGABYTE SATA2 SATA controller driver has been installed from the motherboard driver disk.
Launch the GIGABYTE RAID CONFIGURER from All Programs in the Start menu.
Step 1:
In the GIGABYTE RAID CONFIGURER screen,
right-click on the array to be rebuilt in the RAID
LIST block. Select Rebuild Raid. (Or click the
Rebuild icon in the tool bar.)
Step 3:
Select a drive to rebuild the array and click Next.
Step 5:
The rebuilding progress is displayed at the
bottom of the screen.
Appendix
Step 2:
When the Rebuilding RAID Wizard appears,
click Next.
Step 4:
Click Finish to start the RAID rebuilding process.
Step 6:
When finished, restart your system.
- 106 -