Cd Playback Notes - Barbie Tune Blossom BAR100 Owner's Manual

CD PLAYBACK NOTES:

• This unit is capable of playing standard CDs or 3" singles; no adapter is required.
• If a disc is inserted incorrectly, dirty, damaged or not present at all, "disc" will
appear in the display.
• As each track is played, the track number and elapsed time are shown in
the display.
• To remove the disc, open the CD compartment, hold the edge of the CD and
gently press the center spindle and lift the CD.
• "OPEN" will appear in the display when the CD Compartment door is open.
• Although this unit can read CD-R and CD-RW discs, in addition to normal CDs,
the playability of those discs may be affected by the type of software that was used
to create the discs, as well as the blank media you are using. 100% playability
cannot be guaranteed. This is not an indication of a problem with this unit.
ANTI-SHOCK SYSTEM
This CD player has a built-in anti-shock system that cuts down on CD skipping,
which is useful when using the CD player in the car or while jogging/walking.
When the unit is turned on, the anti-shock system will start automatically, the
sound will mute for just a moment and the display will show the blinking ANTI-
SHOCK indicator. Within a few seconds, the ANTI-SHOCK indicator will fill to
indicate music signals are stored memory.
To turn the anti-shock system off, press the ASP button. To turn the anti-shock
system on again, press the ASP button again.
NOTES:
• When the CD player is used in a stable location, turn the anti-shock system off
by pressing the ASP button. When the anti-shock system is OFF, battery
consumption is less.
• The anti-shock system provides for continuous sound output when the unit is
subject to vibration, but it will not correct errors, such as a defective or dirty CD.
OPERATION (CONTINUED)
11