Delete A Step; Delete A Complete Chase; Delete All Chases - American DJ DMX OPERATOR User Instructions

DELETE A STEP:

1. Press the PROGRAM BUTTON (FIG. 6) for three (3) seconds to
activate program mode. The LCD DISPLAY (FIG.3) will indicate
program mode by displaying a continuous flashing light next to
'PROG.'
2. Select the CHASE 1 TO 6 (FIG. 5) that contains the step you would
like to delete.
3. Press and release the TAP SYNC/DISPLAY (FIG.11).
4. After selecting the TAP SYNC/DISPLAY (FIG.11) use the UP and
DOWN BUTTONS, to manually scroll to the step you wish to delete.
5. When you have reached the step you wish to delete, press and
release the AUTO/DEL (FIG.8).

DELETE A COMPLETE CHASE:

1. Press and hold down the CHASE BUTTON (FIG.5) that you want to
delete.
2. While holding down the CHASE BUTTON (FIG.5) press and release
the AUTO/DEL BUTTON (FIG. 9).
3. Release the CHASE BUTTON (FIG.5). The chase should be deleted.

DELETE ALL CHASES:

This function will allow you to clear all chase memory
(delete all chases).
1. Press and hold down the AUTO/DEL BUTTON (FIG.8).
2. While holding down the AUTO/DEL BUTTON (FIG.8) disconnect the
power.
3. Holding down the AUTO/DEL BUTTON (FIG.8) reconnect the
power hold for 3 seconds LED's blink all chase memory should be
erased.
American DJ Los Angeles, CA 90058 - DMX OPERATOR User Manual