Changing The Rapid Wake (Sleep Mode) Settings - Sony SVT13132CXS VAIO User Manual

VAIO User Guide
Troubleshooting
How to Use
Windows 8: The Basics
Parts Description
Setup
Network / Internet
Connections
Settings
Playback
Backup / Recovery
Security
Other Operations
Notifications
© 2013 Sony Corporation

Changing the Rapid Wake (Sleep Mode) Settings

You can change the Rapid Wake settings in VAIO Control Center.
Rapid Wake is enabled by default. With this function, you can keep your VAIO computer in
Sleep mode without risk of data loss because the computer enters Sleep mode after your
working data is saved on the built-in storage device.
In addition, you can conserve more battery power by reducing power consumption when the
computer is in Sleep mode.
1. Start VAIO Control Center
2. Enable/disable the setting in Rapid Wake.
Note
With Rapid Wake disabled, your working data is not saved on the built-in storage device
when the computer enters Sleep mode. Therefore, if the computer is turned off during
Sleep mode because, for example, the battery pack runs out of power or the computer is
disconnected from an AC power source, the working data will be lost and cannot be
restored. To avoid data loss, be sure to save the data before the computer enters Sleep
mode. With Rapid Wake disabled, the power indicator light blinks slowly in orange during
Sleep mode, and the charge and power indicator lights blink simultaneously when the
battery pack runs out of power during Sleep mode.
If you use the Windows hard disk drive encryption feature, you need to configure other
settings. See Notes on Sleep Mode
Related Topic
Using Sleep Mode
Notes on Sleep Mode
177
and select Hardware.
[Details]
[Details] for more information.
Search
Back | Back to Top