Sharp LC32DV24U - 31.5" LCD TV Service Manual page 20

Gear Motor
Feed Motor
Safety surface for pressing
of the insert.
Switch PCB Ass'y
~ SPINDLE MOTOR ~
Traverse Ass'y
Check Hook
Check Hook
Check Hook
• Loosen the wire in the direction of the arrow.
2-3: FFC WIRE HANDLING
1. When installing the FFC, fold it correctly and install it as
shown from Fig. 2-3-A to Fig. 2-3-B.
NOTE
1. Do not make the folding lines except the specified
positions for the FFC.
[ 24 pin FFC ]
To Pick Up PCB Printing Surface
DISASSEMBLY INSTRUCTIONS
8.0 ± 0.2mm
Fig. 2-2-C
~ FEED MOTOR ~
WHITE (4)
BROWN (3)
• Install wire from (1) to (4) in order.
YELLOW (2)
GREEN (1)
Fig. 2-2-D
Check Hook
Fig. 2-2-E
o
Fold it by 90
20 ± 1mm
30 ± 1mm
Fig. 2-3-A
[ 6 pin FFC ]
B2-2
40 ± 1mm
Fold
Fold
60 ± 1mm
Fig. 2-3-B