Analog Outputs; Digital Output - Ayre CX-7eMP Owner's Manual

It is not normally
recommended to use both sets of

analog outputs

simultaneously.
4
Analog Outputs
The Ayre CX-7e
single-ended outputs. Balanced connections are
made via three-pin XLR connectors, while
single-ended connections are made via RCA
connectors.
When you have a choice, a balanced connection
will offer slightly higher sound quality than a
single-ended connection.
Digital Filter
The digital filter of the Ayre CX-7e
user-selectable algorithms. A selector switch is
located on the rear panel. One algorithm produces
greater accuracy in the time domain and is labeled
"Listen". The other algorithm produces greater
accuracy in the frequency domain and is labeled
"Measure".
It is recommended that the selector switch be set
to the "Listen" position. However some listeners
may prefer the additional high-frequency energy
provided by the "Measure" position.

Digital Output

The Ayre CX-7e
digital audio output on the rear of the unit. This
may be used when connecting to a digital recording
unit or other device, such as an external
digital-to-analog converter (DAC). A switch on the
MP offers both balanced and
MP
MP features a balanced AES/EBU
features two