Lan Cable Status - Asus P5WD2 Premium User Manual

Target Frequency [Overclock XX%] Target Frequency [Overclock XX%] Target Frequency [Overclock XX%]
Target Frequency [Overclock XX%] Target Frequency [Overclock XX%]
Allows you to set the maximum overclock percentage for the selected NOS
Mode. Configuration options: [Overclock 3%] [Overclock 5%] [Overclock
7%] [Overclock 10%] [Overclock 15%] [Overclock 20%] [Overclock 30%]
Selecting a very high frequency may cause the system to become
unstable. If this happens, revert to the default setting.
4.4.2 4.4.2

LAN Cable Status

LAN Cable Status
4.4.2 4.4.2 4.4.2 LAN Cable Status LAN Cable Status LAN Cable Status
This menu displays the status of the Local Area Network (LAN) cable
connected to the LAN (RJ-45) port.
POST Check LAN Cable
LAN Cable Status
Pair Status
1-2 Normal
3-6 Normal
4-5 Normal
7-8 Normal
POST Check LAN Cable [Disabled] POST Check LAN Cable [Disabled] POST Check LAN Cable [Disabled]
POST Check LAN Cable [Disabled] POST Check LAN Cable [Disabled]
Allows you to enable or disable LAN cable check during POST. When
enabled, the menu reports the cable faults or shorts, and displays the point
(length) where the fault or short is detected.
Configuration options: [Disabled] [Enabled]
This function is available only on Marvell LAN (LAN2). See page 5-10 for
details.
A S U S P 5 W D 2 P r e m i u m A S U S P 5 W D 2 P r e m i u m A S U S P 5 W D 2 P r e m i u m A S U S P 5 W D 2 P r e m i u m A S U S P 5 W D 2 P r e m i u m
[Disabled]
Length
N/A
N/A
N/A
N/A
Check LAN cable
during POST.
4 - 2 3 4 - 2 3 4 - 2 3 4 - 2 3 4 - 2 3